The Chartered Institute of Logistics & Supply Chain Nigeria
/100 4 INVENTORY AND MATEIAL MANAGEMENT REGISTER TO START YOUR EXAMINATION 1 / 100 42.When unattended,forklift trucks must be left with the fork arms tilted forward and lowered to rest on …… (i) The ground (ii) The middle (iii)The top 2 / 100 24.One of the primary benefits of preventive maintenance is….. (I) Safety improvements (ii) Safety prevention (iii) unsafe mode 3 / 100 81.Supply chain management is the management of …………… (i)Flow of work done (ii) Flow of goods and services (iii)Flow of company’s income 4 / 100 11. Strategies are needed to manage inventory (i) True (ii) false 5 / 100 45.Ignition key must be kept in…..place (i) Safe (ii) unsafe (iii)Wet 6 / 100 48.During fork lift operation, should care be taken to avoid pedestrians and other vehicles or not? (i) True (ii) False 7 / 100 33.The major considerations to material handling are… (i) The position of the Storehouse (ii) The choice of material (iii) Handling management 8 / 100 49.Fork lift should only be used in some certain areas, where there is enough room, why? (i) for safe operation (Ii) To avoid pedestrians (iii) To avoid hawkers 9 / 100 42.When unattended,forklift trucks must be left with the fork arms tilted forward and lowered to rest on …… (i) The ground (ii) The middle (iii)The top 10 / 100 35. Using inventory analysis in your business, you should first…. (i) Audit your stock levels (ii) First ignore anything like auditing (iii) Handle material carefully 11 / 100 56. Folk lift trucks should only be used to lift loads within their certified capacity (i) True (Ii) False 12 / 100 66. some of the health and safety responsibilities at work can be grouped into……. (i) 2 (ii) 3 (iii)4 13 / 100 4. The basic decisions to make regarding inventory creation are…….Excep i) Cycle Safety( (iii)Handy 14 / 100 62.A load must be picked especially if someone is standing close to it. (i) True (ii) False. 15 / 100 16. When creating a preventive maintenance plan,you should…… (i) First take stock of your company’s assets and review maintenance procedure (ii)Access the function of inventory (iii) Take company’s stock to the consumers 16 / 100 84.Components of supply chain are (i)Planning (ii)supply (iii)Trading 17 / 100 21.Can smart maintenance plans increase the company’s productivity? (i) True (ii) False. 18 / 100 50.Sharp ends and overhead obstructions must be avoided as …… as possible (i)Near (ii)Far (ii)Far 19 / 100 87.Elements of supply chain mgt are…….in numbers (i)2 (ii)3 (iii)4 20 / 100 63.The operation of rough terrain forklift involves special hazard,additional care must be considered (i) True (ii) False 21 / 100 61.General operation procedure involves…… (i)Operation must not carry passengers anywhere on the fork lift truck (ii) Operation must not be conversant (iii) Operation must not be aware of hazard 22 / 100 9.Inventory management strategies involve ……… (i)Keep adequate stock records (ii) understand the stocks (iii)Spread of inventory 23 / 100 85.Other supply chain components are (i) Inventory (ii)0rder (iii) Services 24 / 100 76.OSHA Stands for Occupational Safety and Health Administration (i) True (ii) False 25 / 100 44. Should the engine key be removed and the handbrake applied or not? (i) True (ii) False 26 / 100 28.Efficient use of resources help you use your resources more efficiently (i) True (ii) False 27 / 100 69. Obligation to cooperate with their employer is …..Responsibilities( (i) Employer (ii) Manufacturers (iii) Employee 28 / 100 14……... Is another function of inventory (I)To help the production and distribution (ii)Control the cost of price (iii)Vital organization of stock 29 / 100 77.Handling and management of hazardous materials is NOT necessary in a warehouse (i) True (ii) False 30 / 100 43.ABC analysis brings simplicity to inventory analysis by all inventory into three buckets (i) True (ii) False 31 / 100 13.Other functions of inventory management include the following except (i) To track your inventory (ii) Inspection of stock (iii) Stock identification 32 / 100 34.Some of these are the major considerations except…. (i) Economy of movement (ii) The storehouse layout (iii) The choice of material. 33 / 100 22. Basically, poorly planned maintenance strategy can...…. Company’s productivity (i) Improve (ii) Hinder (iii) plan 34 / 100 96.Shipment accuracy is related to which measures? (I)Manufacturing (ii) Purchase (iii)Logistics 35 / 100 74.Some of the health and safety issues are the following except (i) Overpampering workers (Ii)Unsafe use of forklifts (iii)improper stacking of products 36 / 100 70.Ensure product is safe to use and fit for use is …..Responsibilities (i)Manufacturers (ii) Employee (iii) Employer 37 / 100 71.What are the main causes of injuries in the stores/Warehouse? (i) Falls from height (Ii) Lack of eating iii) Too much of water. 38 / 100 6.The cost of inventory should be kept as …… as possible (i) Low (ii)High (iii)Any rate 39 / 100 97.Some risks that are not operational are… (i)Cultural issues (II) task issues (III)Light issues. 40 / 100 51. Special care must be taken when handling the fork lift truck (i) True (ii) False 41 / 100 11. Strategies are needed to manage inventory (i) True (ii) false 42 / 100 68.Provision of safety equipment is …… Responsibilities (i) Employer (ii)Employee (iii)Manufacturer 43 / 100 100.Which of these is a model to developing ones supply chain? (i)Flexible model (ii) Customer chain model (iii) Supply chain mode 44 / 100 54.Road humps, rough or soft surfaces are to be …. (i) Allowed (ii) Avoided (iii) Maintained 45 / 100 58.Wherever possible, fork lift trucks must be driven with the forks in the ……..position (i) Higher (ii) Lowered (iii) Normal 46 / 100 90.Typpical supply chain activities involve…… (i)Monitoring of continuous improvement (i) Physical activities in long term 91.Some of the customer service measures are…. 47 / 100 53.Industrial fork lift trucks must only be driven on …. (I)All surfaces (ii) Chosen area (iii)Suitable area 48 / 100 27. PM can help ensure if you ever want to sell a piece of equipment or trade it in for a newer model, this is true about… (i) Maximum machine resale (ii) optimal equipment (iii) Basic operation 49 / 100 31.The Acronym AGVs stands for….. (i) Acurate glancing visuals (ii) Automatic Guided Vehicles (iii) Automated Gadget values 50 / 100 In inventory,holding large amounts of inventory allows a company to be very responsive to flunctuation in customer demand (i) True (ii) False 51 / 100 23. A plan in does not help in the use of efficient resources (i) True (ii) False. 52 / 100 75.what is the full meaning of PPE? (i) Proper parties of Employers (ii) Personal protective Equipment (iii)patient part of employees 53 / 100 20.Increased productivity is affected negatively when your tools work optimally True False 54 / 100 86.Which of these is NOT correct about components of supply chain? (i) Transportation (II)Return of goods (iii) Purchase of goods 55 / 100 30.preventive maintenance involves regularly inspecting equipment as soon as they are discovered. (i) True (ii) False. 56 / 100 57.Should forklift truck be adjusted that the fork heels never touch the ground or not (I) It should (ii) it shouldn’t (iii) Not sure 57 / 100 37. which of the inventory has the highest value and highest profit margins? (i)A-inventory (ii) B-inventory (iii) C-inventory 58 / 100 32.The choice of handling equipment must NOT be considered carefully (i) True (ii) False 59 / 100 7.The spread of supply chain is ranged from …….. (i) Raw material (ii) finished goods (iii) manufacturers 60 / 100 78. Hazardous materials can be the following except….. (i) Explosives (ii) Petroleum (iii) Storehouse 61 / 100 15.To avoid stock-outs, some level of safety stock must e held true false 62 / 100 72…….is another cause of injuries in the warehouse (i)Proper packing of goods (ii)Hit by moving vehicles (iii)Too much work 63 / 100 41. ….Should be the type of folk lift to be used in plant premises (i) FORTLIFT TRUCKS (ii) Operational folklift (iii) Industrial folk lift 64 / 100 36. ABC stands for……… (i) Always Being Crazy (ii) Already before capital (iii) Always Better control 65 / 100 46.Who should drive a forklift? (i) anybody (ii) Only authorized operators (iii)Unauthorized driver 66 / 100 .12.Some inventory management functions include (i)Physical movement & management (ii) Stock control (iii) All of the above 67 / 100 88.These are some of the elements EXCEPT….. Operation (ii)Integration (iii)Identification 68 / 100 59.Movement with loads in excessively raised positions must be avoided to minimize the danger of toppling (i) True (ii) False 69 / 100 26.Repairing an apparatus is often more cost -effective than replacing it, maintaining it properly will result in less damage. This is true about…. (i) Reduced expenses (ii) Maximum machine resale (iii) Optimal equipment 70 / 100 21.Can smart maintenance plans increase the company’s productivity? (i) True (ii) False. 71 / 100 91.Some of the customer service measures are…. (i)customer relations (ii)Customer Agents (iii)Customer defection rate 72 / 100 98.Is it proper to adjust to customer’s need or not? (i)True (ii)False 73 / 100 60.In particular, long tubes must be carried using appropriate attachments (i) True (ii) False 74 / 100 79.Hazardous material require separate storage facility (i) True (ii) False 75 / 100 92.Measuring performance includes the following except… (i)Order accuracy (ii)Product return rate (iii)Supplier inventory 76 / 100 25. Not only does preventive maintenance help you avoid major equipment failures……. this is true about (I) Optimal equipment operation (ii) Basic operation (iii)Reduced expense operation 77 / 100 55.Should forklift truck be operated on excessive gradients? (i) True (ii) False 78 / 100 3.How many basic decision do we make regarding creation of inventory? ) 3 (ii)2 (iii)4 79 / 100 67.The various group include these except….. (i) Employer responsibilities (ii) Manufacturers responsibilities (iii)Student responsibilities 80 / 100 82.SCM stands for…… (I)System Chambers management (ii)Service customer’s management (iii)Supply Chain Management 81 / 100 11. Strategies are needed to manage inventory (i) True (ii) false 82 / 100 94.Overtime usage is a manufacturing related measures (i) True (ii) False (ii) False 83 / 100 18. Is there a necessity for a clear picture of material handling equipment ? True False 84 / 100 19. Setting of goals is not necessary True False 85 / 100 47.Fork lift truck operators should only drive in areas where they are authorized to do so (i) True (ii) False 86 / 100 93.Some purchasing related measures are (i)Unit purchase cost (ii)product defect rate (iii)Market cost 87 / 100 95. Delivery consistency is a Logistics Related Measures (i) True (ii) False. (ii) False. 88 / 100 52.some of these are common fork lift hazard except…. (i) Loading bays (ii) Excavations (iii) Extra loads 89 / 100 8.Inventory analysis is……… (i) Just a technique of goods/ product (ii) The process of understanding the product (iii) To mix up the stock and product at a go. 90 / 100 10.Inventory mgt strategies include these except…. (i) Monitor all aspects of inventory (ii)Consider first in-first out (FIFO) principle. (iii)Develop inactive relation and unfriendly with suppliers. 91 / 100 65.The parking brake must be capable of holding the …. (i) Forklift (ii) Driver (iii) Clipper 92 / 100 99………..Could make a possible difference in the market (I)Selling produce to customers always ii) Being able to provide uunique solutions to customers (iii) Showing customers the right way to the factory. 93 / 100 39.Which of these inventory sells regularly but doesn’t have much values as A-inventory (i) – inventory (ii) B-inventory (iii)C- inventory 94 / 100 43. Again ,the engine must be …….when not in use (i)Switched off (ii) switched on (iii) operated 95 / 100 2.Inventory management descries your …………to manage and report on the flow of goods (i)Inventory (ii)Efforts (iii)Paper 96 / 100 40.The inventory that doesn’t sell much and generates the least revenue is ….. (i) -A-inventory (ii) B-inventory (iii) C-Inventory 97 / 100 29.Reactive maintenance is one strategy for taking care of your equipment (i) True (ii) False (ii) False 98 / 100 73. Below are some causes of injuries in the store/warehouse except… (i)Hit something stationary (ii) Hit by moving,falling object (iii) Too much of workload 99 / 100 .What is a project? (i)A temporary endeavour undertaken to create a unique product (ii)A permanent step taken for advert creation of services (iii)A written document containing all goods and services undertaken. 100 / 100 17.It is possible to set objectives such as a specific reduction in the number of equipment failures True False Your score is 0% Restart quiz
INVENTORY AND MATEIAL MANAGEMENT
1 / 100
42.When unattended,forklift trucks must be left with the fork arms tilted forward and lowered to rest on ……
2 / 100
24.One of the primary benefits of preventive maintenance is…..
3 / 100
81.Supply chain management is the management of ……………
4 / 100
11. Strategies are needed to manage inventory
5 / 100
45.Ignition key must be kept in…..place
6 / 100
48.During fork lift operation, should care be taken to avoid pedestrians and other vehicles or not?
7 / 100
33.The major considerations to material handling are…
8 / 100
49.Fork lift should only be used in some certain areas, where there is enough room, why?
9 / 100
10 / 100
35. Using inventory analysis in your business, you should first….
11 / 100
56. Folk lift trucks should only be used to lift loads within their certified capacity
12 / 100
66. some of the health and safety responsibilities at work can be grouped into…….
13 / 100
4. The basic decisions to make regarding inventory creation are…….Excep
14 / 100
62.A load must be picked especially if someone is standing close to it.
15 / 100
16. When creating a preventive maintenance plan,you should……
16 / 100
84.Components of supply chain are
17 / 100
21.Can smart maintenance plans increase the company’s productivity?
18 / 100
50.Sharp ends and overhead obstructions must be avoided as …… as possible
19 / 100
87.Elements of supply chain mgt are…….in numbers
20 / 100
63.The operation of rough terrain forklift involves special hazard,additional care must be considered
21 / 100
61.General operation procedure involves……
22 / 100
9.Inventory management strategies involve ………
23 / 100
85.Other supply chain components are
24 / 100
76.OSHA Stands for Occupational Safety and Health Administration
25 / 100
44. Should the engine key be removed and the handbrake applied or not?
26 / 100
28.Efficient use of resources help you use your resources more efficiently
27 / 100
69. Obligation to cooperate with their employer is …..Responsibilities(
28 / 100
14……... Is another function of inventory
29 / 100
77.Handling and management of hazardous materials is NOT necessary in a warehouse
30 / 100
43.ABC analysis brings simplicity to inventory analysis by all inventory into three buckets
31 / 100
13.Other functions of inventory management include the following except
32 / 100
34.Some of these are the major considerations except….
33 / 100
22. Basically, poorly planned maintenance strategy can...…. Company’s productivity
34 / 100
96.Shipment accuracy is related to which measures?
35 / 100
74.Some of the health and safety issues are the following except
36 / 100
70.Ensure product is safe to use and fit for use is …..Responsibilities
37 / 100
71.What are the main causes of injuries in the stores/Warehouse?
38 / 100
6.The cost of inventory should be kept as …… as possible
39 / 100
97.Some risks that are not operational are…
40 / 100
51. Special care must be taken when handling the fork lift truck
41 / 100
42 / 100
68.Provision of safety equipment is …… Responsibilities
43 / 100
100.Which of these is a model to developing ones supply chain?
44 / 100
54.Road humps, rough or soft surfaces are to be ….
45 / 100
58.Wherever possible, fork lift trucks must be driven with the forks in the ……..position
46 / 100
90.Typpical supply chain activities involve……
47 / 100
53.Industrial fork lift trucks must only be driven on ….
48 / 100
27. PM can help ensure if you ever want to sell a piece of equipment or trade it in for a newer model, this is true about…
49 / 100
31.The Acronym AGVs stands for…..
50 / 100
In inventory,holding large amounts of inventory allows a company to be very responsive to flunctuation in customer demand
51 / 100
23. A plan in does not help in the use of efficient resources
52 / 100
75.what is the full meaning of PPE?
53 / 100
20.Increased productivity is affected negatively when your tools work optimally
54 / 100
86.Which of these is NOT correct about components of supply chain?
55 / 100
30.preventive maintenance involves regularly inspecting equipment as soon as they are discovered.
56 / 100
57.Should forklift truck be adjusted that the fork heels never touch the ground or not
57 / 100
37. which of the inventory has the highest value and highest profit margins?
58 / 100
32.The choice of handling equipment must NOT be considered carefully
59 / 100
7.The spread of supply chain is ranged from ……..
60 / 100
78. Hazardous materials can be the following except…..
61 / 100
15.To avoid stock-outs, some level of safety stock must e held
62 / 100
72…….is another cause of injuries in the warehouse
63 / 100
41. ….Should be the type of folk lift to be used in plant premises
64 / 100
36. ABC stands for………
65 / 100
46.Who should drive a forklift?
66 / 100
.12.Some inventory management functions include
67 / 100
88.These are some of the elements EXCEPT…..
68 / 100
59.Movement with loads in excessively raised positions must be avoided to minimize the danger of toppling
69 / 100
26.Repairing an apparatus is often more cost -effective than replacing it, maintaining it properly will result in less damage. This is true about….
70 / 100
71 / 100
91.Some of the customer service measures are….
72 / 100
98.Is it proper to adjust to customer’s need or not?
73 / 100
60.In particular, long tubes must be carried using appropriate attachments
74 / 100
79.Hazardous material require separate storage facility
75 / 100
92.Measuring performance includes the following except…
76 / 100
25. Not only does preventive maintenance help you avoid major equipment failures……. this is true about
77 / 100
55.Should forklift truck be operated on excessive gradients?
78 / 100
3.How many basic decision do we make regarding creation of inventory?
79 / 100
67.The various group include these except…..
80 / 100
82.SCM stands for……
81 / 100
82 / 100
94.Overtime usage is a manufacturing related measures
83 / 100
18. Is there a necessity for a clear picture of material handling equipment ?
84 / 100
19. Setting of goals is not necessary
85 / 100
47.Fork lift truck operators should only drive in areas where they are authorized to do so
86 / 100
93.Some purchasing related measures are
87 / 100
95. Delivery consistency is a Logistics Related Measures
88 / 100
52.some of these are common fork lift hazard except….
89 / 100
8.Inventory analysis is………
90 / 100
10.Inventory mgt strategies include these except….
91 / 100
65.The parking brake must be capable of holding the ….
92 / 100
99………..Could make a possible difference in the market
93 / 100
39.Which of these inventory sells regularly but doesn’t have much values as A-inventory
94 / 100
43. Again ,the engine must be …….when not in use
95 / 100
2.Inventory management descries your …………to manage and report on the flow of goods
96 / 100
40.The inventory that doesn’t sell much and generates the least revenue is …..
97 / 100
29.Reactive maintenance is one strategy for taking care of your equipment
98 / 100
73. Below are some causes of injuries in the store/warehouse except…
99 / 100
.What is a project?
100 / 100
17.It is possible to set objectives such as a specific reduction in the number of equipment failures
Your score is
Restart quiz